ASME B16.9 carbon steel pipe tee
What is ASME B16.9 carbon steel pipe tee?
ASME B16.9 carbon steel pipe tee is one of pipe fittings,main Used to change the direction of the fluid used in the main pipe to branch pipe. According to the using it has high pressure and low pressure.such as using Sewage treatment we can using low pressure carbon steel pipe tee or stainles steel tee.
Standrd asme b16.9 carbon steel pipe tee specification
- Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
- Size : Equal Tee ( 1/2″～24″), ERW / Buttweld Equal Tee(1/2″～48″)
- Type : Equal Tee / ERW / Equal Tee / Fabricated
- Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
- Form : ASME B16.9 carbon steel pipe Tee.
supplier, exporter and manufacturer of the Carbon steel pipe tee
Beijing Metleader Pipeline Technology Inc. mainly engaged in manufacturing and exporting all kinds of carbon steel pipe fittings and flange. Our all products specially the carbon steel equal tee has been exported to many countries and areas. The export volume is being increased with fast speed in the international market because of our stable quality and good service.
ASME B16.9 steel pipe Tee
| Standards | ANSI – B 16.9 ASTM A403 – ASME SA403 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’ ASME B16.9 – ‘Factory-Made Wrought Buttwelding Fittings” ASME B16.25 – ‘Buttwelding Ends’ MSS SP – 43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications’ |
| Schedule | Sch 5 TO Sch XXS. |
| Variations | Welded & Seamless |
| Sizes | 1/2” TO 36” (SEAMLESS UPTO 24”) (WELDED 8” TO 36” ) |
| Materials | Monel, Nickel, Inconel, Hastalloy, Titanium, Tantalum, Stainless Steel, Alloy Steel, Carbon Steel, Cupro-Nickel 90/10 & 70/30 Stainless Steel ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 316/316L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404 |
| Type | Butt Weld (BW) |
| Thickness | Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc. |
| Dimension | Outside diameter: 1/2″ à 24″ (21,34 – 609,5 mm) Thickness: SCH 5S, 10S, 40S (STD), 80S (XS), 160, XXS (1,65 – 59.51 mm) |
Our main product list
 |  |  |  |  |
| Carbon steel pipe fittings | Stainless steel eccentric reducer | ASME B16.9 Carbon steel pipe elbow | Carbon steel eccentric reducer | Stainless steel reducing tee |
Production Process of Steel pipe tee
①Receiving examination of staple
It’s the primary mandatory chain to ensure sensible quality. The testing things discuss with chemical composition, mechanical capability and metallographic analysis.
② Cutting staple
Properly and strictly dominant cutting size and proportion will guarantee moderate price.
③ Hot forming
During this step the staple are going to be placed on the pushing machine, then obtaining the elbow blanks. The temperature and speed of hot forming verify the standard of elbow blank. If the standard of blank is incredibly sensible which may scale back some price. thus it’s terribly necessary to regulate and record the temperature and speed of hot forming.
④ Sizing
The form of elbow blanks that dawned hot forming method aren’t superb. thus it’s necessary to regulate the form, at identical time inspecting if the standard of adjusted blank is ok or not when size.
⑤ Heat treatment
The aim of warmth treatment is to eliminate the strain inside elbow in order that the density is a lot of equally. rigorously recording the temperature of warmth treatment and cooling time area unit the keys.
⑥ Short blasting
The aim of short blasting is to get rid of the rust on the elbow. the dimensions of sandblasting will have an effect on the sleek of elbow surface, if the dimensions is just too huge can result in the surface is rough, thus it’s higher to decide on tiny size sand.
⑦ Bevel finish machining
The angle of bevel finish is totally different for various normal elbow. properly and strictly dominant the machining method to create certain the angle is qualified.
⑧ Coating
Typically the coating is black painting, vanish and anti-rust oil. irrespective of which kind the surface ought to be swimmingly.
The whole production chains area unit all vital, that the datas of every production step of projection should be recorded in details in step with ISO request. it’s the guarantee permanently quality.
Another standard steel pipe tee:
- ASME B16.9 stainless steel tee
- MSS SP-43 carbon steel equal tee and reducing tee
- MSS SP-43 stainless steel equal tee and reducing tee
- JIS B2312 carbon steel pipe equal tee and reducing tee
- JIS B2312 stainless steel pipe equal tee and reducing tee
- KS B1541 steel pipe tee
