China low carbon steel pipe
China low carbon steel pipe
China low carbon steel pipe is easy to accept a variety of forging, welding and cutting, can be manufactured chains, rivets, bolts, shafts and so on.
Low carbon steel pipe is carbon steel with carbon content less than 0.25%. It is also called soft steel because of its low strength and hardness. Including ordinary carbon structural steel and high quality carbon structural steel.
Low carbon steel pipe is generally rolled into Angle steel, channel steel, I beam steel, steel pipe, steel belt and steel plate, used to make all kinds of building components, containers, boxes, furnace body and agricultural machinery and tools. High quality low carbon steel rolled into thin sheet, the production of automobile cab, engine hood and other deep drawing products; Made into bars, used for making mechanical parts with low strength requirements. Mild steel is limited in use because of its low strength. The strength of steel can be greatly improved by increasing manganese content in carbon steel and adding trace alloying elements such as vanadium, titanium and niobium.
Because the low carbon steel pipe contains indivisible components, it can be formed into different plates, sheets, tubes. In addition to iron and carbon, the cheap steel also contains chromium, about 0.4 to 0.7 percent manganese, 0.1 to 0.5 percent silicon, and a negligible amount of phosphorus, lead, and possibly sulfur. The compound has a density of 0.248 pounds per cubic inch. The material is easily bent and welded to steel of the same material or different materials. Some manufacturers may perform polishing. Unless painted, mild steel generally rusts more easily than other types of steel.
Using mild steel strips, the manufacturer inserts the strips until the desired round steel pipe is formed. Use high frequency current welding. Once formed, pass the pipe through a machine that corrects the deviation and cut the pipe to the desired length. The mild steel pipe was then deburred and pressure tested. Finally, the tube receives hot dip galvanizing or surface painting. The ends of a mild steel pipe may be beveled and threaded with flanges. The automobile industry often uses mild steel pipes for lightweight vehicles. These pipes may also be used for general framing or housing.
